•Comes with 35HP Briggs Vanguard engine that powers a direct-drive double hydraulic pump to  power the machine

•Rugged and heavy duty for the serious woodworker

•Industrial grade slab surfacer designed for high production

•Comes standard with cutter head and an extra set of carbide inserts and sanding head with 10 pieces of sand paper

•Can be used on Track Option #1 or Ground Bed for 70" mills

•Designed for planing and sanding any large surface, such as but not limited to, table tops, counter tops, fireplace mantels, and timbers

•Can remove 1/4" deep by 12" wide at an approximate speed of 8' per minute

•Potential for lower start-up cost in that surfacer will operate on same track as a Tru-Cut 70" Bandmill​

•With special clamping efforts this surfacer has the ability to plane material up to 73" wide​

•90 gallon oil reservoir to maintain cooler oil temperature under continuous operation

•Rubber isolator mounts under the engine plate to keep vibration of the machine to achieve a smoother finish

•19" of vertical head movement which allows for planing and sanding large timbers

•Manual vertical head movement in order to achieve very precise vertical movement. one handle crank equals 1/16"

•14" diameter cutter with 12 carbide inserts that can be rotated or replaced as they dull.

•Sander head attaches to bottom of cutter with a 1/4 turn twist lock system-without the use of any tools

•Does not include track

•Approximate ship weight is 4,750 pounds