•Industrial grade slab surfacer designed for high production

 

•Can remove 1/4" deep by 12" wide at an approximate speed of 8' per minute.

​

•Potential for lower start-up cost in that Surfacer will operate on the same track as a Tru-Cut 70" Bandmill

​

•35HP Briggs Vanguard Engine to power a double hydraulic pump which runs the machine.

​

•Surfacer has the ability to clamp and plane material up to 72" wide.

​​

•90 gallon oil reservoir to maintain cooler oil temperature under continuous operation.

​

•Rubber isolator mounts under the engine plate to keep vibration of the machine to achieve a smoother finish.

​

•19" of vertical head movement which allows for planing and sanding large timbers.

​

•Manual vertical head movement in order to achieve very precise vertical movement. one handle crank equals 1/16".

​

•14" diameter cutter with 12 carbide inserts that can be rotated or replaced as they dull.

​

•Sander head that attaches to the bottom of the cutter with a 1/4 turn twist lock system without the use of any tools.